Part Number Hot Search : 
ZX55C MCZ33 PIECES WBN5T 8833S APC77101 89C52 QS3251S1
Product Description
Full Text Search
 

To Download MRF6S9045NR1 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Freescale Semiconductor Technical Data
Document Number: MRF6S9045N Rev. 3, 5/2006
RF Power Field Effect Transistors
N - Channel Enhancement - Mode Lateral MOSFETs
Designed for broadband commercial and industrial applications with frequencies up to 1000 MHz. The high gain and broadband performance of these devices make them ideal for large - signal, common - source amplifier applications in 28 volt base station equipment. * Typical Single - Carrier N - CDMA Performance @ 880 MHz, VDD = 28 Volts, IDQ = 350 mA, Pout = 10 Watts Avg., IS - 95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13) Channel Bandwidth = 1.2288 MHz. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain -- 22.7 dB Drain Efficiency -- 32% ACPR @ 750 kHz Offset -- - 47 dBc in 30 kHz Bandwidth GSM EDGE Application * Typical GSM EDGE Performance: VDD = 28 Volts, IDQ = 350 mA, Pout = 16 Watts Avg., Full Frequency Band (921 - 960 MHz) Power Gain -- 20 dB Drain Efficiency -- 46% Spectral Regrowth @ 400 kHz Offset = - 62 dBc Spectral Regrowth @ 600 kHz Offset = - 78 dBc EVM -- 1.5% rms GSM Application * Typical GSM Performance: VDD = 28 Volts, IDQ = 350 mA, Pout = 45 Watts, Full Frequency Band (921 - 960 MHz) Power Gain -- 20 dB Drain Efficiency -- 68% * Capable of Handling 5:1 VSWR, @ 28 Vdc, 880 MHz, 45 Watts CW Output Power Features * Characterized with Series Equivalent Large - Signal Impedance Parameters * Integrated ESD Protection * 200C Capable Plastic Package * N Suffix Indicates Lead - Free Terminations. RoHS Compliant. * TO - 270 - 2 in Tape and Reel. R1 Suffix = 500 Units per 24 mm, 13 inch Reel. * TO - 272 - 2 in Tape and Reel. R1 Suffix = 500 Units per 44 mm, 13 inch Reel.
MRF6S9045NR1 MRF6S9045NBR1
880 MHz, 10 W AVG., 28 V SINGLE N - CDMA LATERAL N - CHANNEL BROADBAND RF POWER MOSFETs
CASE 1265 - 08, STYLE 1 TO - 270 - 2 PLASTIC MRF6S9045NR1
CASE 1337 - 03, STYLE 1 TO - 272 - 2 PLASTIC MRF6S9045NBR1
Table 1. Maximum Ratings
Rating Drain - Source Voltage Gate - Source Voltage Total Device Dissipation @ TC = 25C Derate above 25C Storage Temperature Range Operating Junction Temperature Symbol VDSS VGS PD Tstg TJ Value - 0.5, +68 - 0.5, + 12 175 1.0 - 65 to +150 200 Unit Vdc Vdc W W/C C C
(c) Freescale Semiconductor, Inc., 2006. All rights reserved.
MRF6S9045NR1 MRF6S9045NBR1 1
RF Device Data Freescale Semiconductor
Table 2. Thermal Characteristics
Characteristic Thermal Resistance, Junction to Case Case Temperature 81C, 45 W CW Case Temperature 79C, 10 W CW Symbol RJC Value (1,2) 1.0 1.1 Unit C/W
Table 3. ESD Protection Characteristics
Test Methodology Human Body Model (per JESD22 - A114) Machine Model (per EIA/JESD22 - A115) Charge Device Model (per JESD22 - C101) Class 1A (Minimum) A (Minimum) IV (Minimum)
Table 4. Moisture Sensitivity Level
Test Methodology Per JESD 22 - A113, IPC/JEDEC J - STD - 020 Rating 3 Package Peak Temperature 260 Unit C
Table 5. Electrical Characteristics (TC = 25C unless otherwise noted)
Characteristic Off Characteristics Zero Gate Voltage Drain Leakage Current (VDS = 68 Vdc, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 28 Vdc, VGS = 0 Vdc) Gate - Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) On Characteristics Gate Threshold Voltage (VDS = 10 Vdc, ID = 200 A) Gate Quiescent Voltage (VDS = 28 Vdc, ID = 350 mAdc) Drain - Source On - Voltage (VGS = 10 Vdc, ID = 1.0 Adc) Forward Transconductance (VDS = 10 Vdc, ID = 3 Adc) Dynamic Characteristics Input Capacitance (VDS = 28 Vdc 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Output Capacitance (VDS = 28 Vdc 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Reverse Transfer Capacitance (VDS = 28 Vdc 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Ciss Coss Crss -- -- -- 77 27 0.78 -- -- -- pF pF pF VGS(th) VGS(Q) VDS(on) gfs 1 2 -- -- 2 2.9 0.22 4 3 4 0.3 -- Vdc Vdc Vdc S IDSS IDSS IGSS -- -- -- -- -- -- 10 1 1 Adc Adc Adc Symbol Min Typ Max Unit
Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 350 mA, Pout = 10 W Avg., f = 880 MHz, Single - Carrier N - CDMA, 1.2288 MHz Channel Bandwidth Carrier. ACPR measured in 30 kHz Channel Bandwidth @ 750 kHz Offset. PAR = 9.8 dB @ 0.01% Probability on CCDF Power Gain Drain Efficiency Adjacent Channel Power Ratio Input Return Loss MRF6S9045NR1 MRF6S9045NBR1 Gps D ACPR IRL 21 30.5 -- -- - 20 - 20 -9 -7 22.7 32 - 47 25 -- - 45 dB % dBc dB
1. MTTF calculator available at http://www.freescale.com/rf. Select Tools/Software/Application Software/Calculators to access the MTTF calculators by product. 2. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1955.
MRF6S9045NR1 MRF6S9045NBR1 2 RF Device Data Freescale Semiconductor
Table 5. Electrical Characteristics (TC = 25C unless otherwise noted) (continued)
Characteristic Symbol Min Typ Max Unit Typical GSM EDGE Performances (In Freescale GSM EDGE Test Fixture Optimized for 921 - 960 MHz, 50 hm system) VDD = 28 Vdc, IDQ = 350 mA, Pout = 16 W Avg., f = 921 - 960 MHz, GSM EDGE Signal Power Gain Drain Efficiency Error Vector Magnitude Spectral Regrowth at 400 kHz Offset Spectral Regrowth at 600 kHz Offset Gps D EVM SR1 SR2 -- -- -- -- -- 20 46 1.5 - 62 - 78 -- -- -- -- -- dB % % dBc dBc
Typical CW Performances (In Freescale GSM Test Fixture Optimized for 921 - 960 MHz, 50 hm system) VDD = 28 Vdc, IDQ = 350 mA, Pout = 45 W, f = 921 - 960 MHz Power Gain Drain Efficiency Input Return Loss Pout @ 1 dB Compression Point (f = 940 MHz) Gps D IRL P1dB -- -- -- -- 20 68 - 12 52 -- -- -- -- dB % dB W
MRF6S9045NR1 MRF6S9045NBR1 RF Device Data Freescale Semiconductor 3
B1 R1 VBIAS + C15 RF INPUT R2 L2 R3 C7 L1 Z10 C5 Z1 C1 C2 Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z8 Z9 0.215 0.221 0.500 0.460 0.040 0.280 0.087 0.435 0.057 x 0.065 x 0.065 x 0.100 x 0.270 x 0.270 x 0.270 x 0.525 x 0.525 x 0.525 C3 C4 C6 Z10 Z11 Z12 Z13 Z14 Z15 Z16 PCB Z2 Z3 Z4 Z5 Z6 Z7 Z8 Z9 C9 DUT C8 Z11 Z12
B2 + C10 C16 + C17 + VSUPPLY
C18 RF Z16 OUTPUT C14
Z13
Z14
Z15
C11
C12
C13
Microstrip Microstrip Microstrip Microstrip Microstrip x 0.530 Taper Microstrip Microstrip Microstrip
0.360 x 0.270 Microstrip 0.063 x 0.270 Microstrip 0.360 x 0.065 Microstrip 0.095 x 0.065 Microstrip 0.800 x 0.065 Microstrip 0.260 x 0.065 Microstrip 0.325 x 0.065 Microstrip Taconic RF - 35 0.030, r = 3.5
Figure 1. MRF6S9045NR1(NBR1) Test Circuit Schematic
Table 6. MRF6S9045NR1(NBR1) Test Circuit Component Designations and Values
Part B1 B2 C1, C7, C10, C14 C2, C4, C12 C3 C5, C6 C8, C9 C11 C13 C15, C16, C17 C18 L1, L2 R1 R2 R3 Ferrite Bead Ferrite Bead 47 pF Chip Capacitors 0.8 - 8.0 pF Variable Capacitors, Gigatrim 15 pF Chip Capacitor 12 pF Chip Capacitors 13 pF Chip Capacitors 7.5 pF Chip Capacitor 0.6 - 4.5 pF Variable Capacitor, Gigatrim 10 F, 35 V Tantalum Capacitors 220 F, 50 V Electrolytic Capacitor 12.5 nH Inductor 1 k Chip Resistor 560 k Chip Resistor 12 Chip Resistor Description Part Number 2743019447 2743021447 100B470JP500X 27291SL 100B150JP500X 100B120JP500X 100B130JP500X 100B7R5JP500X 27271SL T491D106K035AS 678D227M025CG3D A04T - 5 Manufacturer Fair Rite Fair Rite ATC Johanson ATC ATC ATC ATC Johanson Kemet Vishay Coilcraft
MRF6S9045NR1 MRF6S9045NBR1 4 RF Device Data Freescale Semiconductor
C15
R2 R3 R1
C18
VDD C16 C17 B2 C7 C5 C8 C3 C6 CUT OUT AREA C4 C10 L2
VGG
B1
L1 C1 C2
C14 C9 C11 C12 C13
TO-270/272 Surface / Bolt down
Figure 2. MRF6S9045NR1(NBR1) Test Circuit Component Layout
MRF6S9045NR1 MRF6S9045NBR1 RF Device Data Freescale Semiconductor 5
TYPICAL CHARACTERISTICS
D, DRAIN EFFICIENCY (%) ACPR (dBc), ALT1 (dBc) -5 -10 -15 -20 -25 -30 D, DRAIN EFFICIENCY (%) -5 ACPR (dBc), ALT1 (dBc) -10 -15 -20 -25 -30 275 mA 350 mA -50 520 mA -60 -70 1 10 Pout, OUTPUT POWER (WATTS) PEP 100 300 1 10 Pout, OUTPUT POWER (WATTS) PEP 100 475 mA 23 22.8 22.6 Gps, POWER GAIN (dB) 22.4 22.2 22 21.8 21.6 21.4 21.2 21 850 860 IRL ALT1 870 880 890 900 910 ACPR VDD = 28 Vdc, Pout = 10 W (Avg.) IDQ = 350 mA, N-CDMA IS-95 Pilot Sync, Paging, Traffic Codes 8 Through 13 Gps D 35 34 33 32 31 -45 -50 -55 -60 -65 -70 f, FREQUENCY (MHz)
Figure 3. Single - Carrier N - CDMA Broadband Performance @ Pout = 10 Watts Avg.
22.6 22.4 22.2 Gps, POWER GAIN (dB) 22 21.8 21.6 21.4 IRL 21.2 21 20.8 850 ALT1 860 870
Gps
48 D 47 46
-35 -40 -45 -50 -55 -60
ACPR
880
890
900
910
f, FREQUENCY (MHz)
Figure 4. Single - Carrier N - CDMA Broadband Performance @ Pout = 20 Watts Avg.
24 IMD, THIRD ORDER INTERMODULATION DISTORTION (dBc) IDQ = 520 mA 23 Gps, POWER GAIN (dB) 475 mA 350 mA 22 275 mA 21 175 mA 20 VDD = 28 Vdc, f1 = 880 MHz, f2 = 880.1 MHz Two-Tone Measurements 19 0.5
-10 -20 -30 IDQ = 175 mA -40 VDD = 28 Vdc, f1 = 880 MHz, f2 = 880.1 MHz Two-Tone Measurements
Figure 5. Two - Tone Power Gain versus Output Power
Figure 6. Third Order Intermodulation Distortion versus Output Power
MRF6S9045NR1 MRF6S9045NBR1 6 RF Device Data Freescale Semiconductor
IRL, INPUT RETURN LOSS (dB)
VDD = 28 Vdc, Pout = 20 W (Avg.) IDQ = 350 mA, N-CDMA IS-95 Pilot Sync, Paging, Traffic Codes 8 Through 13
45
IRL, INPUT RETURN LOSS (dB)
TYPICAL CHARACTERISTICS
IMD, INTERMODULATION DISTORTION (dBc)
-10 IMD, INTERMODULATION DISTORTION (dBc) -20 -30 -40 -50 -60 -70 -80 1 10 Pout, OUTPUT POWER (WATTS) PEP 100 3rd Order 5th Order 7th Order VDD = 28 Vdc, IDQ = 350 mA, f1 = 880 MHz f2 = 880.1 MHz, Two-Tone Measurements
0 -10 -20 -30 -40 -50 -60 7th Order 3rd Order VDD = 28 Vdc, Pout = 45 W (PEP), IDQ = 350 mA f1 = 880 MHz, f2 = 880.1 MHz, Two-Tone Measurements (f1 + f2)/2 = Center Frequency of 880 MHz
5th Order
-70 0.05 0.1
1
10
100
TWO-TONE SPACING (MHz)
Figure 7. Intermodulation Distortion Products versus Output Power
54 53 Pout, OUTPUT POWER (dBm) 52 51 50 49 48 47 46 45 44 23 24 25 26 27 28 29 P1dB = 48.2 dBm (66.07 W) P3dB = 48.6 dBm (72.44 W)
Figure 8. Intermodulation Distortion Products versus Tone Spacing
Ideal
Actual VDD = 28 Vdc, IDQ = 350 mA Pulsed CW, 8 sec(on), 1 msec(off) Center Frequency = 880 MHz 30 31 32 33
Pin, INPUT POWER (dBm)
Figure 9. Pulse CW Output Power versus Input Power
D, DRAIN EFFICIENCY (%), Gps, POWER GAIN (dB) 60 50 40 30 Gps 20 10 0 1 10 Pout, OUTPUT POWER (WATTS) AVG. ACPR TC = 25_C -30_C -65 -75 -85 50 VDD = 28 Vdc, IDQ = 350 mA f = 880 MHz, N-CDMA IS-95 Pilot Sync, Paging, Traffic Codes 8 Through 13 25_C ALT1 85_C D -25 25_C -35 -30_C 25_C 85_C -55 -45 ACPR, ADJACENT CHANNEL POWER RATIO (dBc) ALT1, CHANNEL POWER (dBc)
Figure 10. Single - Carrier N - CDMA ACPR, ALT1, Power Gain and Drain Efficiency versus Output Power MRF6S9045NR1 MRF6S9045NBR1 RF Device Data Freescale Semiconductor 7
TYPICAL CHARACTERISTICS
24 23 Gps, POWER GAIN (dB) 22 21 20 19 18 17 16 1 D 25_C 85_C TC = -30_C
Gps
-30_C 25_C
80 70 60 85_C 50 40 30 20 D, DRAIN EFFICIENCY (%)
VDD = 28 Vdc IDQ = 350 mA f = 880 MHz 10 Pout, OUTPUT POWER (WATTS) CW 100
10 0
Figure 11. Power Gain and Drain Efficiency versus CW Output Power
23.5 23 22.5 22 21.5 21 20.5 20 19.5 19 VDD = 12 V 18.5 16 V 20 V 18 17.5 0 10 20 30 40 28 V 24 V IDQ = 350 mA f = 880 MHz 60 70 80 90 100 32 V
Gps, POWER GAIN (dB)
50
Pout, OUTPUT POWER (WATTS) CW
Figure 12. Power Gain versus Output Power
109 MTTF FACTOR (HOURS X AMPS2)
108
107
106 90
100 110 120 130 140 150 160 170 180 190 200 210 TJ, JUNCTION TEMPERATURE (C) This above graph displays calculated MTTF in hours x ampere2 drain current. Life tests at elevated temperatures have correlated to better than 10% of the theoretical prediction for metal failure. Divide MTTF factor by ID2 for MTTF in a particular application.
Figure 13. MTTF Factor versus Junction Temperature MRF6S9045NR1 MRF6S9045NBR1 8 RF Device Data Freescale Semiconductor
N - CDMA TEST SIGNAL
100 10 PROBABILITY (%) 1 0.1 0.01 0.001 0.0001 0 2 4 6 8 10 PEAK-TO-AVERAGE (dB) IS-95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13) 1.2288 MHz Channel Bandwidth Carriers. ACPR Measured in 30 kHz Bandwidth @ 750 kHz Offset. ALT1 Measured in 30 kHz Bandwidth @ 1.98 MHz Offset. PAR = 9.8 dB @ 0.01% Probability on CCDF. (dB)
-10 -20 -30 -40 -50 -60 -70 -80 -90 -100
1.2288 MHz Channel BW .. ... ..... . .. .............................. ............ ............. . . .. . . . . . . . . . . . . . . . . . . -ALT1 in 30 kHz +ALT1 in 30 kHz . . . . Integrated BW Integrated BW .... . . . ............ ........... ...... .... ........ ..... ... . ....... ....... .. ... ....... . .... .... .. . . .. ......... ......... ... . ..... ...... ....... .. ..... . ..... ... ... . .... .... . ..... .... . ..... . .... ......... . .. .. . ...... .... ....... .. ........ -ACPR in 30 kHz +ACPR in 30 kHz .............. . . .. . . ... .... .......... ..... . ............... . ......... .... ........... Integrated BW Integrated BW .. ...... ............ . . ...... ... . .. .. ...... ....... ...
Figure 14. Single - Carrier CCDF N - CDMA
-110 -3.6 -2.9 -2.2
-1.5 -0.7
0
0.7
1.5
2.2
2.9
3.6
f, FREQUENCY (MHz)
Figure 15. Single - Carrier N - CDMA Spectrum
MRF6S9045NR1 MRF6S9045NBR1 RF Device Data Freescale Semiconductor 9
Zo = 5 f = 910 MHz f = 850 MHz Zsource Zload f = 850 MHz f = 910 MHz
VDD = 28 Vdc, IDQ = 350 mA, Pout = 10 W Avg. f MHz 850 865 880 895 910 Zsource 0.42 + j0.30 0.42 + j0.44 0.45 + j0.60 0.48 + j0.74 0.50 + j0.85 Zload 3.05 + j1.27 3.16 + j1.33 3.31 + j1.33 3.43 + j1.20 3.35 + j1.05
Zsource = Test circuit impedance as measured from gate to ground. Zload = Test circuit impedance as measured from drain to ground.
Input Matching Network
Device Under Test
Output Matching Network
Z
source
Z
load
Figure 16. Series Equivalent Source and Load Impedance
MRF6S9045NR1 MRF6S9045NBR1 10 RF Device Data Freescale Semiconductor
NOTES
MRF6S9045NR1 MRF6S9045NBR1 RF Device Data Freescale Semiconductor 11
PACKAGE DIMENSIONS
MRF6S9045NR1 MRF6S9045NBR1 12 RF Device Data Freescale Semiconductor
MRF6S9045NR1 MRF6S9045NBR1 RF Device Data Freescale Semiconductor 13
MRF6S9045NR1 MRF6S9045NBR1 14 RF Device Data Freescale Semiconductor
2X
aaa
M
r1 CAB
DRAIN ID
B
E1
A
GATE LEAD
DRAIN LEAD
D1
2X
b1 aaa
M
CA
D
2
E
c1
H
DATUM PLANE
F ZONE "J"
A
A1 A2 7 Y E2 Y
C
SEATING PLANE
NOTES: 1. CONTROLLING DIMENSION: INCH. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DATUM PLANE -H- IS LOCATED AT THE TOP OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE TOP OF THE PARTING LINE. 4. DIMENSIONS "D" AND "E1" DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS .006 PER SIDE. DIMENSIONS "D" AND "E1" DO INCLUDE MOLD MISMATCH AND ARE DETERMINED AT DATUM PLANE -H-. 5. DIMENSION "b1" DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE .005 TOTAL IN EXCESS OF THE "b1" DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. DATUMS -A- AND -B- TO BE DETERMINED AT DATUM PLANE -H-. 7. DIMENSION A2 APPLIES WITHIN ZONE "J" ONLY. 8. CROSSHATCHING REPRESENTS THE EXPOSED AREA OF THE HEAT SLUG. DIM A A1 A2 D D1 E E1 E2 F b1 c1 r1 aaa INCHES MIN MAX .100 .104 .039 .043 .040 .042 .928 .932 .810 BSC .438 .442 .248 .252 .241 .245 .025 BSC .193 .199 .007 .011 .063 .068 .004 MILLIMETERS MIN MAX 2.54 2.64 0.99 1.09 1.02 1.07 23.57 23.67 20.57 BSC 11.12 11.23 6.30 6.40 6.12 6.22 0.64 BSC 5.05 4.90 .18 .28 1.60 1.73 .10
STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE
CASE 1337 - 03 ISSUE C TO - 272- 2 PLASTIC MRF6S9045NBR1
RF Device Data Freescale Semiconductor
EEEEE EEEEE EEEEE EEEEE EEEEE EEEEE EEEEE EEEEE EEEEE EEEEE EEEEE EEEEE EEEEE
E2 VIEW Y - Y
PIN 3
1
NOTE 8
MRF6S9045NR1 MRF6S9045NBR1 15
How to Reach Us:
Home Page: www.freescale.com E - mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1 - 800 - 521 - 6274 or +1 - 480 - 768 - 2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1 - 8 - 1, Shimo - Meguro, Meguro - ku, Tokyo 153 - 0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1 - 800 - 441 - 2447 or 303 - 675 - 2140 Fax: 303 - 675 - 2150 LDCForFreescaleSemiconductor@hibbertgroup.com
Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. (c) Freescale Semiconductor, Inc. 2006. All rights reserved.
RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and electrical characteristics of their non-RoHS-compliant and/or non-Pb-free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale's Environmental Products program, go to http://www.freescale.com/epp.
MRF6S9045NR1 MRF6S9045NBR1
Rev. 16 3, 5/2006 Document Number: MRF6S9045N
RF Device Data Freescale Semiconductor


▲Up To Search▲   

 
Price & Availability of MRF6S9045NR1

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X